EAB Metal Detectors
- Detects Both Ferrous and Non-Ferrous Metals
- Magnetite from Iron Oxide and Ore are Ignored
- Can Be Operated in Close Proximity to Frequency Converters
- Can Be Operated Near Magnets (Minimum Distance Only 6 Feet)
- Available in Either Single or Dual Probe Models
- Probe(s) Constructed of High Temperature PVC Plastic for Durability
- Special Secondary Sensitivity in Area of Metal Splice or Repair Clip
- Adjustable Primary Sensitivity During Operation
- Accepts Both 110 VAC and 220 VAC Single Phase Power
- Three Year Warranty
These quality products from EAB are available in either single probe or dual probe configurations. Single probe units can quickly be converted to dual probe with the addition of an additional probe and spacers. The compact design allows installation in almost any application. The single probe is recommended with burden height less than 4 inches, whereas, dual probes are recommended for burdens above 4 inches. The sensitivity can continously be adjusted if only larger pieces of metal are to be detected. The control unit has self-adjusting electronics housed in a durable, metal cabinet. High quality components ensure our detectors reliability and longevity. Power switches and output relays are gold plated providing reliable service. The unit can be integrated into an existing plant control system without any extra components.
Metal detectors are available for Aggregate, Sand, Recycling, Cement, Brick, Coal, Slag, Wood, Rubber, Food (bulk or packaged) and many other applications.
Metal Detector Specifications
| Supply Voltage: | 110 or 220 volts @ 60 Hz |
| Power Input: | 15 VA |
| Belt Speed: | 20 to 1170 ft/min |
| Permissible Ambient | |
| Temperature: | -13°F to +131°F |
| Input: | 1 coaxial cable, probe |
| Output Metal Signal: | 1 Siemens cradle relay with 2 |
| floating changeover contacts, | |
| switching capacity 220 V, 6 A resis- | |
| tive load, switchable between | |
| normally relaxed mode and normally | |
| activated mode | |
| Housing: | IP 55 or 65 enclosure protection, |
| sheet steel with electrophoretic dip | |
| coating. Stainless steel available upon | |
| request. | |
| Installation: | Wall-mounting |
| Weight: | 20 lbs (9 kg) - QLC unit |
| 40 lbs (18 kg) - SQ unit | |
| Single Probe Units | |
| Comprised of: | 1 control unit, 1 probe, coaxial |
| cable x 32 feet with plug and installa- | |
| tion accessories | |
| Single Probe Installation: | 2 inches clearance between loaded belt |
| and probe | |
| Dual Probe Units | |
| Comprised of: | 1 control unit, 2 probes, 2 |
| spacers with terminal box, coaxial | |
| cable x 32 feet with plug and installa- | |
| tion accessories | |
| Dual Probe Installation: | 2 inches clearance between loaded belt |
| and lower probe unless otherwise | |
| specified | |
| Certification: | ISO 9000 |
